Validation of the New Small Wheel Micromegas sectors for the phase 1 upgrade of the muon forward spectrometer of the ATLAS experiment at CERN

Abstract

Abstract The ATLAS experiment is currently upgrading the first muon station in the high-rapidity region with the New Small Wheels (NSW), based on large-size resistive Micromegas (MM) technology and small-strip Thin Gap Chambers (sTGC). The NSW system is going to be installed in the ATLAS underground cavern during the LHC long shutdown 2 (2021) to enter in operation for Run3 (starting in the first months of 2022). 128 Micromegas quadruplets, each composed by four measurement layers two to three square meters in size, are needed to build the two New Small Wheels, covering a total active area of about 1280 m2. The construction of all MM modules, carried out in France, Germany, Italy, Russia and Greece, is completed. Their mechanical integration into sectors, the installation of on-detector services and electronics, for the first NSW is also completed, along with all validation and acceptance tests. The preparation of the second NSW is very well advanced. The advanced status of the project, in view of the imminent installation of the two NSW in ATLAS by the fall of 2021 will be reported. Micromegas detector construction and integration into sectors is presented, together with results obtained with cosmic rays data during the validation tests and the impressive steps of the wheel assembly completion.