Abstract
Abstract
We developed an FPGA-based high-speed readout system for a complementary
metal-oxide-semiconductor (CMOS) image sensor to observe soft X-ray transients in future satellite
missions, such as HiZ-GUNDAM. Our previous research revealed that the CMOS image sensor
has low-energy X-ray detection capability (0.4–4 keV) and strong radiation tolerance, which
satisfies the requirements of the HiZ-GUNDAM mission. However, CMOS sensors typically
have small pixel sizes (e.g., ∼10 µm), resulting in large volumes of image data.
GSENSE400BSI has 2048×2048 pixels, producing 6 Mbyte per frame. These large volumes of
observed raw image data cannot be stored in a satellite bus system with a limited storage size.
Therefore, only X-ray photon events must be extracted from the raw image data. Furthermore, the
readout time of CMOS image sensors is approximately ten times faster than that of typical X-ray
CCDs, requiring faster event extraction on a timescale of ∼0.1 s. To address these issues,
we have developed an FPGA-based image signal processing system capable of high-speed X-ray event
extraction onboard without storing raw image data. The developed compact system enabled mounting
on a CubeSat mission, facilitating early in-orbit operation demonstration. Here, we present the
design and results of the performance evaluation tests of the proposed FPGA-based readout system.
Utilizing X-ray irradiation experiments, the results of the X-ray event extraction with the
onboard and offline processing methods were consistent, validating the functionality of the
proposed system.