Hingeless arm for space robotics actuated through shape memory alloys

Abstract

Abstract Operating outside the spacecraft via remotely controlled structures is an important opportunity in different space applications. The research in this area is focused on designing robots that are sufficiently flexible to allow inspection in locations where access is difficult or impossible for astronauts, while minimizing weight and bulk. The purpose of the research is to design a borescope for space applications with no hinges or other mechanisms, exploiting biomimetic design concepts. This is pursued by giving to the borescope a backbone exoskeleton provided by a continuous structure made of fibre reinforced composite material and using NiTi wires as tendons, taking advantage of their low weight and dimensions, which allow them to be embedded between the composite layers during the lamination process. After a study of the state of the art of flexible structures, concentrated in the medical and robotic fields, the research work unfolded in two phases. In the first design phase, several composite layup solutions were considered and analysed using finite element models, leading to the definition of the borescope geometrical parameters and to an initial estimate of the displacements that can be achieved. In the second experimental phase, seven prototypes were produced and tested, with one or more wires, to validate the design and to search for a configuration that can be actuated in different directions. The borescope prototypes resulted flexible enough to achieve an extended degree of bending and at the same time sufficiently rigid to allow complete rearm of the NiTi wires. The numerical and experimental study led to the definition of the design parameters, the number of wires, and the manufacturing technique to integrate NiTi actuators.