Nonlinear Phenomena in the Mass Loss of Polyimide Films under Hyperthermal Atomic Oxygen Beam Exposure

Abstract

Erosion phenomenon of polyimide film under the hyperthermal atomic oxygen beam exposure, which is a simulated low Earth orbit space environment, has been investigated. The polyimide film was spin-coated on a sensor crystal of a quartz crystal microbalance, and the mass of the film was measured under the atomic oxygen beam exposure. The spin-coated polyimide film which was exposed to a 4.7 eV atomic oxygen beam showed a mass gain at the beginning of the reaction and then steady-state mass loss followed. The experimental results of the mass change was analysed by the computational model, and the results showed that the carbon abstraction rate at the oxygen-adsorbed sites was two orders higher than that at the unoxidized polyimide surface. The computational results suggested that a large fraction of the carbon abstraction reaction occurred in the oxygen-adsorbed site through a Langmuir–Hinshelwood reaction mechanism.