Sliding Friction Studies of a Poly(Ether Ether Ketone)/Poly(Ether Imide) Blend-Reference-Cited by-同舟云学术

Sliding Friction Studies of a Poly(Ether Ether Ketone)/Poly(Ether Imide) Blend

Published:1996-06 Issue:2 Volume:8 Page:275-280
ISSN:0954-0083
Container-title:High Performance Polymers
language:en
Short-container-title:High Performance Polymers

Author:

Stuart B H¹,Briscoe B J²

Affiliation:

1. Department of Materials Science, University of Technology Sydney, PO Box 123, Broadway NSW 2007, Australia

2. Department of Chemical Engineering, Imperial College, Prince Consort Road, London SW7 2BJ, UK

Abstract

The results of a sliding friction study of a blend of poly(ether ether ketone) (PEEK) and poly(ether imide) (PEI) are reported. The frictional behaviour of the blend follows a similar trend to that of the unblended PEEK, but the overall friction is higher in the case of the blend. However, comparison of the data obtained for unblended and blended PEEK shows that there is a reduction in the failure potential of PEEK when PEI is incorporated. That is, the potential for catastrophic thermally induced contact failure in the PEEK/PEI blend investigated is less than that observed for the unblended PEEK.

Publisher

SAGE Publications

Subject

Materials Chemistry,Organic Chemistry,Polymers and Plastics

Link

http://journals.sagepub.com/doi/pdf/10.1088/0954-0083/8/2/008

Reference7 articles.

1. Mechanical properties of poly(ether-ether-ketone) for engineering applications

2. Boundary lubrication of thermoplastic polymers in model fluids

3. The failure of poly (ether ether ketone) in high speed contacts

4. Binary blends of poly(ether ether ketone) and poly(ether imide): miscibility, crystallization behavior and semicrystalline morphology

5. Miscible blends of poly(aryl ether ketone)s and polyetherimides

Cited by 6 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Mechanical and tribological properties of PA66/PPS blend. III. Reinforced with GF;Journal of Applied Polymer Science;2006

2. Mechanical and tribological properties of PA66/PPS blend. II. Filled with PTFE;Journal of Applied Polymer Science;2006

3. Friction and wear mechanisms of polyamide 66/high density polyethylene blends;Journal of Polymer Science Part B: Polymer Physics;2005

4. Mechanical Properties and Tribology Performance of the Ekonol-PEEK Composite;Journal of Reinforced Plastics and Composites;2004-10

5. Mechanical and tribological properties of polyamide 6 and high density polyethylene polyblends with and without compatibilizer;Wear;2000-11