Abstract
Abstract
Alumina/carbon composites are modern nanomaterials used as adsorbents, catalysts, catalyst supports, supercapacitors, and electrode materials for fuel cells. Among other methods, aluminum anodizing is fairly fast and inexpensive for producing anodic alumina/carbon composites with controllable properties. In the present study, the morphology and composition of carbon-enriched anodic alumina films were obtained during aluminum anodic oxidation in formic acid with ammonium heptamolybdate (C content is ca. 5.0 mass%) or oxalic acid (C content 3.4 mass%) additives. The anodic alumina films have a wide blue fluorescence (FL) in the 400–650 nm wavelength range with a maximum at ca. 490 nm. The FL decay is nonexponential and has an average lifetime of 1.54 and 1.59 ns for ammonium heptamolybdate and oxalic acid additives, respectively. As samples obtained in sulfuric acid (i.e. without carbon) do not possess detectable FL in the 400–650 nm wavelength range, it was concluded that carbon-containing inclusions are responsible for the FL properties of the films. The initial samples were dissolved in the hot aqueous HCl solution and then dialyzed to extract the carbon-containing component. It was shown that the solutions contain nanoparticles of amorphous carbon with a 20–25 nm diameter. Carbon nanoparticles also exhibit an excitation-dependent emission behavior at 280–450 nm excitation wavelengths with average lifetimes of 7.25–8.04 ns, depending on the composition of the initial film. Carbon nanoparticle FL is caused by the core of carbon nanoparticles (CNPs) and various emission centers on their surface, such as carbonyl, carboxyl, and hydroxyl groups. As CNPs could be exceptional candidates for detection technologies, the biocompatibility assays were performed with living COS-7 mammalian cells, showing a minimal negative impact on the living cells.