High sensitivity refractive index sensor based on double peanut-shaped and etched multimode fiber structures

Abstract

Abstract A fiber optic refractive index (RI) sensor based on an etched multimode fiber (MMF) with a double peanut-shaped structure is proposed and experimentally demonstrated. The sensor consists of two peanut-shaped and a section of etched MMF tapered fiber structure. The excitation of the fundamental mode to higher-order modes is facilitated by using the beam splitting/coupling effect of the double peanut-shaped and etched taper structures, and the higher-order modes can be excited into an evanescent field. In the sensing medium, the stronger the evanescent field, the stronger the energy shock between the fiber and the sensing environment. Experimental results showed that the sensitivity was 326.52 nm/RUI and 823.91 nm/RUI when the etched waist taper diameter was 51.92 μm and the glycerol solution index ranged from 1.3395 to 1.3945 and 1.3945 to 1.4200, respectively. Compared to the MMF sensor structure without etching, the RI sensitivity is improved by about 2 times. In addition, the temperature characteristics of the sensor were investigated over a range of 30 °C–100 °C, and the results showed a maximum temperature sensitivity of only 30.24 pm °m−1. The sensor structure has a low-temperature sensitivity and the temperature effect on the RI measurement results is negligible within the allowable error range. The sensor has the advantages of simple fabrication, wide measurement range, good stability, low cost, and compact structure, which has potential application value in the field of RI detection.