Influences of number of geosynthetic reinforcement layers on soil arching under cyclic loading

Abstract

Abstract Geosynthetic-reinforced pile supported (GRPS) embankments have been widely used in highways and railways on soft subsoil. During the operation period, these embankments are often subjected to cyclic loading, such as traffic loading. Considering that soil arching is a key load transfer mechanism in these embankments, the development of soil arching under cyclic loading is vital important to operational safety of these embankments. Conventional trapdoor system cannot represent actual conditions of soil arching in GRPS embankments because it have a forcibly-moved trapdoor and cannot simulate load-induced subsoil settlement. Hence, this paper used a self-moving trapdoor supported by compression springs that moved up and down dependent on its overburden pressure. To investigate influences of number of geosynthetic reinforcement layers on soil arching under cyclic loading, two self-moving trapdoor tests were conducted, including a single layer and two layers, where the total reinforcement stiffness were approximately same. The trapdoor test results show that the inclusion of two reinforcement layers with a fill layer of a certain height in between reduced surface settlement of the fill and tensile forces of reinforcement, as compared with a single reinforcement layer. It also enhanced soil arching effect and improved the stability of soil arching under cyclic loading.