Initial Design of Free energy magnetic generator (FEMG)

Abstract

Abstract Nowadays, it is essential for some areas that there would be implemented such ways for electricity cost reductions in the areas, equipment durability and minimal technical labour demand maintenance. There are many type of generator that can help to generate the electricity such as steam turbines, gasoline turbines, electrical generators, solar or wind turbines, internal combustion engines, and biogas engines. However, there are many drawbacks of using these generators. One of the major drawbacks of these non-renewable generators are the released of hazardous exhausts into the environment such as carbon dioxide, nitrogen oxide, or any other dangerous exhaust. These will produce air pollution, although it imposes environmental costs through manufacture and construction. One of the well-known energy sufficient generator is the permanent magnet generator. The main aim for this project is to design a Free Energy Magnetic Generator (FEMG) using conventional induced voltage generating principle for industrial and residential appliances. The design will be used JMAG Designer Software from designing and observing the generator. It can be concluded that this generator can give a continuous output power supply due to the capability of the generator to produce high output power with low cogging torque which is 2.1Nm. Perhaps, the maximum value of magnetic flux between coil is 2.1066 while the minimum value is 0.0418.