Sensitivity analysis on heat pump - mechanical vapor recompression desalination system by recovering waste heat of offshore power converter station

Abstract

Abstract Offshore wind power converter stations produce massive low-temperature waste heat, which can hardly be used constrained by their offshore location. Therefore, the recovery of the waste heat has been raising widespread concern. Meanwhile, a large amount of fresh water is needed for its cooling system. So, a novel system combining high temperature heat pump and a mechanical vapor recompression system (HP-MVR) was proposed, and sensitivity analysis was performed to optimize it. The heat pump was used to absorb the waste heat and to produce high temperature water. The mechanical vapor recompression system was adopted to produce fresh water and to recover the condensation heat from the steam. In order to determine the impact parameters on the two crucial performance indicators of freshwater production and unit energy consumption, this article introduces a sensitivity analysis method, focusing on analyzing the sensitivity of the three operating parameters of heat pump condensation temperature, saturated water vapor inlet temperature entering the compressor, and freshwater condensation temperature to these two performance indicators. The results show that the sensitivity coefficients of heat pump condensation temperature, saturated water vapor inlet temperature entering the compressor, and freshwater condensation temperature are 1.13, -0.26, and 1.56. So, the freshwater condensation temperature has the most significant effect on freshwater output. Their sensitivity coefficients to unit energy consumption are 1.02, 1.41, and -0.64. The saturated water vapor inlet temperature entering the compressor has the most significant impact on the required power consumption per unit of freshwater. It will give some guidance for the application of low-temperature waste heat in seawater desalination and the reduction of operating costs.