Abstract
Abstract
Thermal energy storage technologies have been widely used to mitigate intermittency from renewable energy such as solar energy. Phase change material (PCM) is a certain material that can be used as a heat storage medium and is available in a wide range of operating temperatures. Molten salt is one of the PCMs that has the advantage of a very high operating temperature. The PCM solidification simulation based on HitecXL molten salt using COMSOL Multiphysics software will be carried out with variations in heat absorption of 1 - 5 kW/m2, assuming constant heat absorption. The results show that the PCM solidification process starts from the surface of the Stirling engine heat exchanger pipe. The part of the PCM that has been solidified will fall following the direction of gravity and cause a phenomenon such as a droplet. The flow that occurs is a natural flow caused by the buoyancy force due to changes in density due to temperature gradients in the solidification process. The time required for the PCM to completely solidify is closely related to the amount of heat absorption. The greater the heat absorption from the pipe, the faster the PCM to fully solidified.