The design and properties of galvanic anticorrosive coatings for important precision parts of farming equipment

Abstract

Abstract The paper explores the possibility of using a number of nickel alloys in multilayer coatings to decrease nickel consumption and preserve the functional effect of the coating. The following is proved by the graphical calculation technique using experimental data on the galvanic properties of the multilayer coating parts. Nickel-iron, nickel-phosphorus and nickel-tin alloy can be applied as a lower coating layer rather than semi-shiny, shiny or composite nickel. It is advisable to use a nickel-iron alloy as the middle (second) layer, and the concentration of iron depends on the composition of the first and third layers. If a nickel-iron alloy is applied as the material of the first layer, then the second layer may be semi-shiny (Ns-sh) or shiny (Nsh) nickel. The substitution of nickel layers for nickel alloys allows to considerably (about 10%) decrease the cost of a multilayer coating, while the protective properties are remaining the same. The application of the same nickel-containing alloys as single-layer anticorrosive coatings shows a lower level of protective properties.