Control system of induction motor drive of a hoisting unit with a controlled current converter in the rotor circuit

Abstract

Abstract The use of a double-feed machine circuit is a promising way to modernize induction motor drives of mine hoisting installations. The main problem of using doubly-fed electric machine in the electric drives with a large range of speed control is the release implementation and machine operation of after it at low speed. Existing implementations of electric drives based on a doubly-fed machine (DFM) assume the use of additional resistors in the rotor circuit (rotor station) for releasing the brakes, which complicates the control circuit and significantly reduces the reliability of the drive. In this case, the electric drive circuit with additional active resistances in the rotor circuit has optimal starting characteristics, since a change in the active resistance of the rotor does not cause a change in the critical moment, and, therefore, in the overload capacity, which makes it possible to implement the release mode. It is possible to preserve the advantages of regulating the DFM speed by changing the active resistance of the rotor by using an imitation of its change. The article is devoted to the study of the possibility of implementing such mode using a controlled current converter in the rotor circuit.