Research on Panels Fabricated by Fibers Derived from Kenaf Bast after Environmental Restoration-Reference-Cited by-同舟云学术

Research on Panels Fabricated by Fibers Derived from Kenaf Bast after Environmental Restoration

Published:2021-05-01 Issue:3 Volume:781 Page:032008
ISSN:1755-1307
Container-title:IOP Conference Series: Earth and Environmental Science
language:
Short-container-title:IOP Conf. Ser.: Earth Environ. Sci.

Author:

Dong Wang,Hu Zhixin,Hu Xiao,Yang Pang,Yong Wang

Abstract

Abstract In this paper, Kenaf bast fiber were the research objective. The fiber morphology was studied, as well as the compatibility between fibers and cemented. At last. The manufacture technology for fiber reinforced cement-based panel was studied. The results are as follows: The average length of Kenaf bast fiber, which determines Kenaf bast fiber as long fibers. Effects of the influences of fiber to cement (w/c), water to cement (m/c) were significant. When the conditions of the process were following that the ratio of wood-cement ratio was 0.22, water-cement ratio of 0.42, the Kenaf bast fiber-cement panel met the requirement of excellence (MOR = 14 MPa, MOE = 3900 MPa, TS = 1.26%) specified in GB/T 24312-2009.

Publisher

IOP Publishing

Subject

General Engineering

Link

https://iopscience.iop.org/article/10.1088/1755-1315/781/3/032008/pdf

Reference7 articles.

1. Micromorphological investigation on wood-cement composites after long-term use;Parameswaran;Holzforschung,1979

2. Study on production technology of fire-resistant and water-resistant eucalyptus composite sheet;Luo;Wood Industry,2000

3. Preliminary study on rapid curing technology of cement particleboard;Jin;Forestry Science and technology development,2000

4. Study on rapid curing technology of cement particleboard [D]. Beijing: Institute of Timber Industry;Liu,1996

5. Durability and strength of cement bonded wood particle composites made from construction waste;Wolfe;Forest Products Journal,1999