Limestone-Gypsum Wet Flue Gas Desulfurization Wastewater Treatment

Abstract

Abstract In this paper, chemical precipitation process is used for the treatment of the desulfurization wastewater generated by the waste gas treatment system of the limestone-gypsum flue gas desulfurization process of a thermal power plant. After one year of operation, the technology is reliable and stable. The removal rate of suspended matter, COD, fluoride, mercury and sulfate reached 99.5%, 98.3%, 87.5%, 99.8% and 85.6% respectively, and the corresponding effluent concentrations were 54 mg/L, 20 mg/L and 9.6 mg/L, 0.04 mg/L, 980 mg/L. Finally, the effluent quality of the system is better than the discharge requirements of “Discharge standard of wastewater from limestone-gypsum flue gas desulfurization system in fossil fuel power plants” (DL/T997-2006). In addition, the total electricity and chemical charges per ton of wastewater treatment were 6.50 yuan, which is lower than most of the engineering project under the same discharge requirements. Therefore, the process has certain engineering advantages.