Performance Assessment and Engineering behaviour of Cement Concrete with partially Replaced Foundry Sand as Fine Aggregate

Abstract

Abstract Metal foundries make heavy use of metal casting. The residual sand, also known as foundry sand, is removed from the foundry after numerous cycles of recycling and reuse have been completed successfully. This article describes the environmentally safe and technically sound uses of foundry sand in civil engineering. Using foundry sand in several engineering applications can solve the problem of foundry sand disposal and other problems. Silica sand is the primary component of foundry sand, which is subsequently coated with a thin layer of carbon, dust, and any leftover binder. Foundry sand can increase the strength and durability of concrete. Foundry sand can be used as a supplement, a partial replacement for fine aggregate, a complete replacement for fine aggregate, or as a replacement for cement in order to achieve a variety of concrete properties. In the present study, the impact of replacing fine aggregate with foundry sand on the compressive strength, split tensile strength, and elastic modulus of concrete with mix proportions of 1:1.45:2.2:1.103 was analysed. Three proportions of foundry sand were substituted for fine aggregates. The replacement percentages for fine aggregate were 10, 20, and 30 percent by weight. During varied curing times, compressive strength, split tensile strength, and elastic modulus tests were conducted on all replacement sand levels (14-days & 28-days) Test findings revealed a modest improvement in compressive strength, split tensile strength, and modulus of elasticity when fine aggregates were replaced with a certain amount of foundry sand. This indicates that foundry sand can be safely utilised in concrete for durability and strength purposes.