Author:
Ni’mah Kafa ‘Aisyana,Warnana Dwa Desa,Kinoshita Masataka,Komara Eki
Abstract
Abstract
Subduction zone is one of the areas which has great potential of earthquake. Nankai trough in Japan is such an area with subduction zone where earthquake records are well archived, despite its complexity. Also, slow earthquakes have been detected in this zone over the past 20 years, so that there are many opportunities to understand the dynamics and deformation in such an active setting. To expand the knowledge about slow earthquake which might occur and trigger a bigger earthquake, this study wants to infer the relationship between overpressure, one of the states and properties of seismogenic zone, and tremors. To carry out this research, 4 velocity models of seismicity line taken in Hyuga-nada are used. And the recorded tremor data placed around the lines came from Yamashita. In correlating the overpressure and tremors, this research is started by converting the Vp model to porosity model using Wyllie equation to predict the pore pressure conditions in the area. Then, the model will be used for fitting the actual data. Assuming there is an exact location following the normal compaction curve as a function of effective stress, it can be used for estimating the overpressure. Overpressure is economized by comparing the observed porosity and the reference curve at the same depth below seafloor. Potential overpressure occurred may be associated with areas of low Vp. The estimated overpressure is in the range of 1.2 to 12 MPa in the depth range of 700 to 4000mbsf. This study also concludes that the overpressure zone overlaps with the tremor location, although the overpressure value estimated is also still uncertain due to the uncertainty of the density value used.