On-Stream Pipe Scale Inspection Using Gamma-Ray Tomography Technique: Field Experiment in Karaha Geothermal Power Plant, Indonesia

Abstract

Abstract Pipe scaling is a common problem in geothermal power plants. Currently, the pipeline withinside the Karaha Telaga Bodas geothermal subject is indicated to incorporate scale because of pressure anomalies. On-stream pipe scale inspection techniques are needed to maintain the production process. This research aims to apply the gamma-ray transmission tomography technique to pipelines in geothermal fields. The gamma-ray tomography system consists of a 137Cs (2.96 GBq) gamma radiation source, a scintillation detector, mechanical parts, control parts, and data acquisition. Scanning was performed at three predetermined points: brine pipe 1, two-phase pipe, and brine pipe 2. The system scans half of the pipe circumference (180°) and divides it into 32 projections (5.625°). Each projection performs a translational scan with a resolution of 4 mm. Three cross-sectional images of the pipe were obtained, showing the inside condition. Pipe scale was observed at three scanning points with a thickness of 12 mm-48 mm. Gamma tomography can potentially be a tool for examining pipe scale thickness in geothermal fields. The use of a single detector is a limitation that needs to be improved. Apart from that, the stability of the control and mechanical parts must also be improved.