Author:
Al-Shammam Muther Mohamed Kasim,Mahmood Ahmed Noori
Abstract
Abstract
In this research, the materials used are poly methyl methacrylate (PMMA) as base material with chloroform as pure solvent (99.8%) aluminum oxide (Al2O3) as support material as base material in percentages (25%, 50%, and 75%) several tests were carried out on the models, including X-ray diffraction (XRD), and the results showed the characteristic of crystallization through the characteristic peaks with a reinforcement percentage (75%) while scanning electron microscopy (SEM) images showed that the highest effect (ammonium sulfate, cadmium sulfate) in the form of nodular structures dimensions (84.45nm - 88.84nm) with a support reinforcement percentage (75%) representing gas liberation sites as a result of surface reactions with (ammonium sulfate, cadmium sulfate) atomic force microscopy (AFM) images showed that the thick film surface had a lower roughness with a reinforcement percentage (25%) which gave the highest stability of the thick film surface.