Extraction and Stripping Behaviour Study on Gold Recovery from Printed Circuit Board

Abstract

Abstract Single extraction was used to investigate the suitable condition parameters of temperature and agitation speed in extracting gold, Au (III) from printed circuit board (PCB). Extractant di-(2-ethylhexyl) phosphoric acid (D2EHPA) was mixed with thiourea leaching solution. From the extraction system, the optimised conditions are the temperature of 45°C and the agitation speed of 300rpm and obtained 88% of percentage of extraction (%E). In order to enhance the recovery of Au(III), three samples underwent stripping process, the results from three samples which are sample 1,2 and 3 showed the percentage of stripping efficiency (%S) were 50.37%, 29.58% and 25.64% respectively. The results of FTIR showed the presence of C-H and C-O bond in waste cooking oil and after addition of D2EHPA into the diluent the P-O-H, P-O-C and O-H vibration band were appeared.