Modeling and Comparison of Data Obtained by GPR, for Geological / Structural Analysis of a Carbonated Ornamental Rock Quarry - Blocometry Validation - Case Study in Valinho De Fátima, Portugal

Abstract

Abstract Portugal, in the continental and insular territory, has raw geological resources in diversity and quality that are materials for the manufacturing industries, particularly linked to the civil construction, architecture and public works with great weight in its exports, revealing to be one big producer of ornamental stones worldwide. In this industry, the presence of discontinuities, grain size, colour, textural anisotropy and porosity are factors that can determine the economic viability of the exploitations. For this, it is important to develop effective prospecting routines that allow the geological/structural fast analysis and economic potential assessment of the massifs and subsequent correct planning and dimensioning of the exploitations. This work intends to model and integrate data from the ground penetration radar (GPR), together with close-range photogrammetry, derived from an Unmanned aerial vehicle (UAV) imagery. The objective is to identify and determine the spatial distribution of the various elements by modelling the acquired data, as well as verifying the feasibility of the technical disassembly option adopted. We have used GPR as it is non-destructive, fast to deploy, survey, process and interpret. The acquired data were processed using the GPR-SLICE, where a 3D final dataset was obtained and interpreted. GPR and photogrammetric model was integrated and interpreted and validated with direct field observations. The model obtained showed in its upper part, an area corresponding to the presence of sludge from the cut of the rock, followed by a strip that corresponds to the oolitic limestone. Further down to the end of the block, the presence of oolitic limestone with crossed stratification is identifiable. There was a textural and structural correspondence between the GPR data and direct field observations. GPR did not reveal any major morphostructural discontinuity, validating the technical option of choosing the places where the cuts were made for their individualization, as the block was cut clean. The GPR and photogrammetry data integration method revealed to be complementary, where results were obtained easily, fast, and with centimeter accuracy. The same methodology presented, revealed to be cheap and effective for both localized studies and optimization of the overall quarry’s extraction plan and design.