Analysis of linkage type sea wave power plant design through motion study and 3D printed modelling

Abstract

Abstract Sustainable energy generation is becoming increasingly important because of the expected limitations in current energy resources and for reducing pollution. Wave energy generation has seen significant developments in recent years. This research has produced a linkage-type PLTGL design that utilizes ocean waves to raise and lower the float lever and move the linkage mechanism which then causes a back and forth movement of the rack gear which will rotate the pinion and cause the dynamo drive shaft to rotate. Using ocean wave data in the waters of Tanjung Berikat, Bangka Tengah, and with the help of the SolidWorks application, this design is then simulated to determine the resulting movement and rotation. The rotation generated through the simulation can reach 532 Rpm with the assumption that it does not involve friction forces and material loads that exist in the PLTGL design. This design was made in 3D using the CR-10 V3 type 3D printing machine which produced a model with a scale of 25% of the original design. The model is used as a discussion material for designers to improve the design.