Mechanical properties of jabon (Neolamarckia cadamba (Roxb.) Bosser) wood 13 years old and its potential utilization as a structural material

Abstract

Abstract Jabon (Neolamarckia cadamba (Roxb.) Bosser) is a type of fast-growing tree that is expected to meet the national demand for wood because it has fast-growing properties. This study’s objective was to examine the mechanical properties of 13 years old jabon wood based on its position in the stem. The preparation of mechanical properties test samples and their tests refer to the British Standard (BS) 373 Methods of testing small clear specimens of timber and the American Society for Testing and Materials (ASTM) D143 Standard test method for small clear specimens of timber. Based on the results of the study, the stem parts (bottom, middle, and top) had no significant effect on the mechanical properties of wood except for the compressive strength parallel to the grain and hardness. In general, the mechanical properties showed an increase from the bottom to the top of the stem and from the pith toward the bark, although there were some differences. The mechanical properties of jabon wood obtained from this study generally showed higher values than jabon wood used in other studies with younger ages, although in general, it did not change the category of jabon wood from strength class III-IV. However, its use as a structural material would be more profitable than using a younger age of jabon wood, as it is usually harvested so far.