Laboratory evaluation of properties of modified asphalt binder with different types of additives

Abstract

Abstract This research aims to assess the properties of Polymer Modified Bitumen (PMB) binder prepared with different types of additives such as (Waste low density polyethylene (W-LDPE) and crumb rubbers (CR)and Styrene Butadiene Styrene (SBS)). Most of these additives are sustainable materials since it is derived from old scrap materials. All the above-mentioned materials (W-LDPE, CR and SBS) were added with percentages of (2, 4, and 6 percentage) of the weight of pure asphalt binder. Several tests were conducted to evaluated the properties of improved asphalt binder such as penetration test, Ductility test, Softening point test, Rotational viscosity test as well as thin-film oven test. The results of investigation revealed that, the using of different types of PMB significantly improved the physical properties and performance of asphalt. The using of sustainable waste materials such as W-LDPE and CR significantly improve the properties of PMB and contribute in recycling great amount of waste materials. Also, the results showed that the using of high percentage of SBS (6%) significantly increase the viscosity of asphalt binder and that can affect workability of Hot Mix Asphalt (HMA) compared with same percentages of W-LDPE and CR).