Determination of the bearing capacity of biaxially bended beams based on the design strength of reinforced concrete

Abstract

Abstract Based on the design assumptions according to Eurocode 2, the concept of determining the value of the design strength of reinforced concrete has been developed for calculating the bearing capacity of reinforced concrete members subjected to biaxial bending. The theorem on the parallelism of the planes of internal and external forces action is applied. The considered design cases are for the most expected forms of the compressed concrete areas, which are characteristic for biaxial bending of beam members. The value of the coefficient of influence of biaxial bending on the characteristics of the member of rectangular section with triangular and trapezoidal forms of the compressed concrete area is obtained. A methodology for calculating the bearing capacity of biaxially bended members based on the application of the design strength of reinforced concrete is brought to the engineering level of application. An example of a calculation is presented, which demonstrates the convenience and effectiveness of the developed method. The proposed method of calculating the bearing capacity of beam member under biaxial bending is approved by comparing the results of calculations with experimental data for 12 samples of biaxially bended beams.