Adaptation of metrology-grade ac current source in velocity mode of Planck-Balance 2: direct referencing induced voltages with ac quantum voltage standard

Abstract

Abstract The adaptation of developed metrology-grade ac current source (MCS) to the velocity mode of measurements of the Planck-Balance 2 as a means for generating ac mechanical oscillations is presented. The universality in operating with the MCS unit especially practical for the Planck-Balance setup for frequencies of 0.1 Hz–20 Hz (including but not limited to the negligence of a broader range of 0.01 Hz up to several hundred Hz) and for amplitudes of up to 10 mA with 16 (offset with 14)-bit effective resolution is demonstrated. MCS allows generating complex ac waveform signals as waveform synthesizers by adding to the original signal an extra five independent harmonic components, each of which with an adjustable resolution of 10 ns for phase and 16-bit for amplitude. Additionally, the MCS is supported by an external clock at 10 MHz frequency which serves also as a common reference time base for the comparison between the direct output signal of MCS, or of the induced voltage in the coil of the Planck-Balance resulting due to the applied current by MCS, with the ac quantum voltage standard at the required accuracy levels.