Experimental study on temperature distribution of double-layer solid cylinder under local heating source

Abstract

Abstract Heating equipment is widely used in production and life, the transient temperature of the heated object reflects the effect of heating equipment, but also an important basis for the design of heating equipment. In the internal temperature measurement of micro heating equipment, some of the temperature measurement instruments are large in size, which makes it difficult to realize precision measurement, and the use of infrared measurement, laser temperature measurement and other methods cannot be used to accurately measure the temperature of the internal points of the material without destroying the material and equipment at the same time. In this study, based on the thermocouple temperature measurement technology and considering the problem of fragility and breakage caused by the small diameter of very fine thermocouple wires, a multi-point temperature synchronization measurement platform is constructed to realize the precise measurement of the temperature at multiple points inside the micro-heating element. Transient temperatures were measured at different locations of a water-containing porous medium inside a 15 mm long heating element under static heating and dynamic suction conditions in the case study. The results show that moisture and suction have a significant effect on the temperature inside the porous media layer. During the suction process, the temperature drop near the suction opening was larger, and the temperature drop near the wall was about 47% of the temperature drop inside. This study is a guide to the design of heating structures for vacuum drying equipment, electrically heated atomization systems and other micro-miniature heating equipment.