Machine learning-enabled thickness estimation of thin coatings on carbon fibre composites using microwaves

Abstract

Abstract Accurate thickness measurement of thin coatings (typically 50–500 μm) on carbon fibre-reinforced polymer composites is a major challenge in the manufacturing and maintenance processes of modern aircraft. Different from the conventional material-dependent technique for prediction, a machine learning-enabled strategy with an artificial neural network configuration is used with no requirement of prior knowledge of the type of coating or substrate under test. In the test, an open microwave cavity resonator sensor is directly placed on a coated composite, and any variation of the coating material, coating thickness and conductivity of the composite alters the resonance frequency. Principal component analysis is employed in the signal pre-processing for the dimensionality reduction of the raw measurement data. In terms of the root-mean-square error, the maximum value for the calibration approach is approximately 15 μm and that for the machine learning-based approach is 12 μm. The sensor system developed enables real-time on-site assessment of coated composite structures and thus offers a new approach for non-destructive evaluation 4.0 with improved efficiency, accuracy and automation.