Development of an experimental apparatus for flat plate drag measurements and considerations for such measurements

Abstract

AbstractAccurately measuring small changes in aerodynamic drag over a flat surface stands at the core of the development of technologies capable of reducing turbulent friction drag. A wind tunnel drag measurement system was developed which improves significantly on the state of the art. Experimental tests demonstrated that an uncertainty of less than 0.5% ofCDat a 95% confidence level was typically achieved, already at drag values below 1 N. This was replicated in two different wind tunnels. A match with literature on riblet performance within 1% ofCDwas obtained. A crucial aspect of the design is the implementation of a correction for the pressure forces on the streamwise-facing surfaces of the test plate assembly. The flexible architecture of the system in the present realisation makes it suitable for most wind tunnels having a test section width of 400 mm or larger, which allows for accelerated development of turbulent drag reduction concepts from moderate-size low-cost facilities towards flow conditions relevant to the intended industrial application.