An event-triggered background-oriented schlieren technique combined with dynamic projection using dynamic mirror device

Abstract

Abstract This paper reports a high-frequency event-triggered background-oriented schlieren (BOS) technique using a combination of an event-triggered camera and dynamic projection. To combine the advantages of continuous and pulsed illumination for the event-triggered camera, a novel background pattern is first developed to incorporate static and dynamic textures generated through projection utilizing a dynamic mirror device. Then, a specific post-processing algorithm is proposed to reconstruct frames with high time accuracy from event data. This technique allows for the continuous observation and capturing of flows at 4000 frames per second (FPS) with a very low cost, breaking through the short operating times of current high-frame-rate BOS. Moreover, the proposed BOS technique can visualize the flow in real-time with high temporal accuracy, a capability that is challenging to achieve with traditional BOS. To examine the proposed technique, BOS experiments were conducted on a sweeping jet actuator with various inlet pressure. The sweeping dynamics and the start-up process of the sweeping jet at various inlet pressure were visualized and investigated. It is found that the proposed event-triggered BOS can continuously visualize and record the jet flow at a resolution of 1280 × 720 pixels with an equivalent frame rate of up to 4000 FPS. The oscillation frequency of the sweeping jet was found to increase linearly with increasing inlet pressure. It reaches 117.2 Hz at an inlet pressure of 0.5 Mpa. Within the first 10 ms or so of start-up, the shape of the sweep was found to be symmetrical. Within the next 100 ms, the jet commences to sweep and saturates. The start-up time of the sweeping jet was quantitatively measured and was observed to decrease with increased inlet pressures.