Abstract
Highlights
A novel approach of multi-phase jet polishing is proposed using a developed polisher, consisting of solid, liquid and gas phases.
An abrasive air jet polishing is suggested through a customized polisher, including solid and gas phases.
After jet polishing, surface roughness Sa decreases from pristine 8.596 to 0.701 and 0.336 μm, and Sa reduces 92% and 96%, respectively.
Defect volume of unit area achieved by optimized parameters lessens 1/12 that of non-optimized ones.
Funder
National Key Research and Development Program of China
National Natural Science Foundation of China
Changjiang Scholars Program of the Chinese Ministry of Education
Subject
Industrial and Manufacturing Engineering