Tailoring the extension-bending-twisting coupling in composite laminates using carbon nanotube hybridization

Abstract

Abstract The existence of extension-bend-twist coupling of deformations in composites is a complex problem. Ability to tailor the coupling response as per the requirement is desirable to harness the high strength-to-weight ratio of composites in many structural applications. Here we report a feasible design strategy to tune the extent of deformation coupling in composite laminates. To this end, carbon nanotube (CNT) grafted lamina is incorporated in the lay-up of conventional composites. Classical laminate theory (CLT) and finite element analysis show that the coupling extent of extension-twist, extension-bending and extension- bending-twist can be suitably designed by varying the number, location and distribution of CNT grafted lamina in a laminate configuration. Theoretical and computational results reveal maximum extension-twist coupling when a single CNT grafted lamina is placed closer to the mid-plane in a 16 ply antisymmetric laminate. Symmetrical placement of CNT grafted lamina avoids the extension-bend coupling. Finite element analysis shows that the lateral bending of composite cantilever beam under combined axial and bending loads can be designed by suitably choosing the configuration of the modified laminate. These findings will significantly contribute in designing structural composites for advanced applications.