Abstract
Abstract
Effects of extrusion speeds (0.3, 1.2, 1.8 and 3.5 mm s−1) on the microstructure and mechanical properties of the Mg–2Sn–1.95Ca–0.5Ce (TXCe220) alloy were analyzed by various detection methods in this article. The results have revealed that extrusion speed exerts a prominent influence towards grain size, recrystallization fraction and texture. As the extrusion speed increases, the microstructure characteristics transform from bimodal grain morphology to the near complete dynamical recrystallization (DRX). The tensile yield strength of TXCe220 decreased from 365 MPa to 180 MPa accompanied by the elongation increasing from 4.0 % to 19.4 % when the ram speed rises from 0.3 mm s−1 to 3.5 mm/s. The high yield strength of low-speed extruded alloys should be mainly ascribed to the nano-scale Mg2Ca with diameter of 30–80 nm precipitates, fine DRX grains and strong texture.
Subject
Metals and Alloys,Polymers and Plastics,Surfaces, Coatings and Films,Biomaterials,Electronic, Optical and Magnetic Materials
Cited by
2 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献