Abstract
Abstract
In this study, high-density polyethylene (HDPE) surfaces were treated with plasma to enhance the adhesion of a water-based paint. A custom-built cold atmospheric pressure plasma jet (CAPPJ) device using a neon transformer as its power source was developed and used in the surface treatment. The jet nozzle of the device was made from polytetrafluoroethylene with two bare stainless-steel electrodes positioned laterally through the nozzle and opposite each other with a 1 mm gap. Gas was allowed to pass through the nozzle, exiting through a 1 mm diameter hole where a plasma jet is ejected through the arc from the electrodes. The effect of plasma treatment on HDPE surfaces was determined. Air and nitrogen were used as the process gases and exposure times were also varied. Hydrophilicity of the surface increased with longer plasma exposure with a corresponding 50% increase in surface free energy compared to the untreated surface. From Fourier transform infrared and x-ray photoelectron spectroscopy analysis, it was seen that plasma treatment introduced oxygen containing functionalities onto the surface. Increase in adhesion of a water-based paint was observed for plasma-treated HDPE sheets.
Funder
University of the Philippines
Subject
Metals and Alloys,Polymers and Plastics,Surfaces, Coatings and Films,Biomaterials,Electronic, Optical and Magnetic Materials
Cited by
2 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献