Abstract
Abstract
The mesoscopic dendrite growth model in the solidification process of molten steel is established, based on the cellular automata model. To accurately describe the TiN nucleation process, a heterogeneous nucleation model was used to describe the TiN nucleation process. The accuracy of the dendrite growth model is verified by comparing the CA model and Lipton–Glicksman–Kurz (LGK) analytical model. The growth process of TiN precipitates was simulated by dynamic mesh generation. Meanwhile, the influence of grid anisotropy on dendrite growth is greatly weakened by introducing the decentered square algorithm, and the growth of the equiaxed crystal in all directions is simulated. The results show that the calculated results of the model are in good agreement with the volume and morphology of TiN observed in the experiment. Meanwhile, it is found that the smaller TiN will dissolve at the end of solidification, and there will be a re-precipitation. The precipitation time of High-N and High-Ti alloy systems with the same concentration product is basically the same, but the final precipitation solid fraction of TiN inclusions in High-N (small Ti/N) alloy is larger. N element is the decisive factor of TiN precipitation.
Funder
National Natural Science Foundation of China
Subject
Metals and Alloys,Polymers and Plastics,Surfaces, Coatings and Films,Biomaterials,Electronic, Optical and Magnetic Materials
Cited by
3 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献