Abstract
Abstract
Additive manufacturing (AM) of single crystal superalloys has got some progress in recent researches, but there are few reports on eliminating recrystallization or mechanical properties of single crystal superalloys by AM. In this work, single-crystal samples of SRR99 were fabricated at high temperature by laser melting deposition (LMD). Owing to the high temperature of substrate in the deposition process, recrystallization in the following heat treatment process was eliminated. The contrast sample of SRR99 was prepared by directional solidification, and the microstructure evolution during heat treatment and tensile property of deposited samples were analyzed. The results showed that the shapes of the γ′ phase became irregular after solution treatment in deposited samples. After a solid solution and aging treatment, the γ′ phase size is larger and the γ′ volume fraction is slightly lower in deposited samples than in the contrast sample. As a result, the yield and tensile strength of deposited samples are slightly lower than that of contrast samples, but the plasticity of deposited samples is better.
Funder
National Natural Science Foundation of China
Subject
Metals and Alloys,Polymers and Plastics,Surfaces, Coatings and Films,Biomaterials,Electronic, Optical and Magnetic Materials
Cited by
1 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献