Remote sensing satellite’s attitude control system: rapid performance sizing for passive scan imaging mode

Abstract

PurposeAttitude determination and control subsystem (ADCS) is a vital part of earth observation satellites (EO-Satellites) that governs the satellite’s rotational motion and pointing. In designing such a complicated sub-system, many parameters including mission, system and performance requirements (PRs), as well as system design parameters (DPs), should be considered. Design cycles which prolong the time-duration and consequently increase the cost of the design process are due to the dependence of these parameters to each other. This paper aims to describe a rapid-sizing method based on the design for performance strategy, which could minimize the design cycles imposed by conventional methods.Design/methodology/approachThe proposed technique is an adaptation from that used in the aircraft industries for aircraft design and provides a ball-park figure with little engineering man-hours. The authors have shown how such a design technique could be generalized to cover the EO-satellites platform ADCS. The authors divided the system requirements into five categories, including maneuverability, agility, accuracy, stability and durability. These requirements have been formulated as functions of spatial resolution that is the highest level of EO-missions PRs. To size, the ADCS main components, parametric characteristics of the matching diagram were determined by means of the design drivers.FindingsIntegrating the design boundaries based on the PRs in critical phases of the mission allowed selecting the best point in the design space as the baseline design with only two iterations. The ADCS of an operational agile EO-satellite is sized using the proposed method. The results show that the proposed method can significantly reduce the complexity and time duration of the performance sizing process of ADCS in EO-satellites with an acceptable level of accuracy.Originality/valueRapid performance sizing of EO-satellites ADCS using matching diagram technique and consequently, a drastic reduction in design time via minimization of design cycles makes this study novel and represents a valuable contribution in this field.