Design and analysis osculating general curved cone waverider

Abstract

Purpose Waverider has high lift to drag ratio and will be an idea aerodynamic configuration for hypersonic vehicles. But a structure permitting aerodynamic like waverider is still difficult to generate under airframe’s geometric constrains using traditional waverider design methods. And furthermore, traditional waverider’s aerodynamic compression ability cannot be easily adjusted to satisfy the inlet entrance requirements for hypersonic air-breathing vehicles. The purpose of this paper is to present a new method named osculating general curved cone (OCC) method aimed to improve the shortcomings of traditional waveriders. Design/methodology/approach A basic curved cone is, first, designed by the method of characteristics. Then the waverider’s inlet captured curve and front captured tube are defined in the waverider’s exit plane. Osculating planes are generated along the inlet captured curve and the designed curved cone is transformed to the osculating planes. Streamlines are traced in the transformed curved cone flow field. Combining all streamlines which have been obtained, OCC waverider’s compression surface is generated. Waverider’s upper surface uses the free stream surface. Findings It is found that OCC waverider has good volumetric characteristics and good flow compression abilities compared with the traditional osculating cone (OC) waverider. The volume of OCC waverider is 25 per cent larger than OC waverider at the same design condition. Furthermore, OCC waverider can compress incoming flow to required flow conditions with high total pressure recovery in the waverider’s exit plane. The flow uniformity in the waverider exit plane is quite well. Practical implications The analyzed results show that the OCC waverider can be a practical high performance airframe/forebody for hypersonic vehicles. Furthermore, this novel waverider design method can be used to design a structure permitting aerodynamic like waverider for a practical hypersonic vehicle. Originality/value The paper puts forward a novel waverider design method which can improve the waverider’s volumetric characteristics and compression abilities compared with the traditional waverider design methods. This novel design approach can extend the waverider’s applications for designing hypersonic vehicles.