Labelling additively manufactured parts by microstructural gradation – advanced copy-proof design

Abstract

Purpose As additive manufacturing techniques, such as selective laser melting, allow for straightforward production of parts on basis of simple computer-aided design files only, unauthorized replication can be facilitated. Thus, identification and tracking of individual parts are increasingly vital in light of globalized competition. This paper aims to overcome the susceptibility of additive manufacturing techniques for product piracy by establishing a method for introducing and reading out product identification markers not visible by naked-eye inspection. Design/methodology/approach Lasers of different nominal power were used for altering the solidification mechanisms during processing in distinct areas of the samples. The resulting local microstructural characteristics and mechanical properties, respectively, were determined by scanning electron microscopy and hardness measurements. The applicability of an advanced eddy current technique for reading out local differences in electro-magnetic properties was examined. Findings The findings show that distinct microstructural features are obtained in dependence of the locally applied laser power. These features manifest themselves not only in terms of grain morphology, texture and hardness but also induce changes in the local electro-magnetic properties. The inscribed pattern can be non-destructively visualized by using an advanced eddy current technique. Originality/value Conventional copy protection basically consists in supplementary labelling or surface modification. In the present study, a new method is proposed for additively manufactured parts, overcoming the drawbacks of the former methods through process-induced microstructure manipulation. Slight alterations in the electro-magnetic material properties can be detected by advanced eddy current method allowing for identification of arbitrary and inimitable component information in additively manufactured parts.