Design and slip prevention control of a multi-sensory anthropomorphic prosthetic hand

Abstract

Purpose The purpose of this paper is to design a multi-sensory anthropomorphic prosthetic hand and a grasping controller that can detect the slip and automatically adjust the grasping force to prevent the slip. Design/methodology/approach To improve the dexterity, sensing, controllability and practicability of a prosthetic hand, a modular and multi-sensory prosthetic hand was presented. In addition, a slip prevention control based on the tactile feedback was proposed to improve the grasp stability. The proposed controller identifies slippages through detecting the high-frequency vibration signal at the sliding surface in real time and the discrete wavelet transform (DWT) was used to extract the eigenvalues to identify slippages. Once the slip is detected, a direct-feedback method of adjusting the grasp force related with the sliding times was used to prevent it. Furthermore, the stiffness of different objects was estimated and used to improve the grasp force control. The performances of the stiffness estimation, slip detection and slip control are experimentally evaluated. Findings It was found from the experiment of stiffness estimation that the accuracy rate of identification of the hard metal bottle could reach to 90%, while the accuracy rate of identification of the plastic bottles could reach to 80%. There was a small misjudgment rate in the identification of hard and soft plastic bottles. The stiffness of soft plastic bottles, hard plastic bottles and metal bottles were 0.64 N/mm, 1.36 N/mm and 32.55 N/mm, respectively. The results of slip detection and control show that the proposed prosthetic hand with a slip prevention controller can fast and effectively detect and prevent the slip for different disturbances, which has a certain application prospect. Practical implications Due to the small size, low weight, high integration and modularity, the prosthetic hand is easily applied to upper-limb amputees. Meanwhile, the method of the slip prevention control can be used for upper-limb amputees to complete more tasks stably in daily lives. Originality/value A multi-sensory anthropomorphic prosthetic hand is designed, and a method of stable grasps control based on slip detection by a tactile sensor on the fingertip is proposed. The method combines the stiffness estimation of the object and the real-time slip detection based on DWT with the design of the proportion differentiation robust controller based on a disturbance observer and the force controller to achieve slip prevention and stable grasps. It is verified effectively by the experiments and is easy to be applied to commercial prostheses.