A method of milling force predictions for machining tools based on an improved ARMA model

Abstract

Purpose Cutting force prediction is pretty important for manufacture management. Thus, the purpose of this paper is to obtain the cutting force of the machining process with high efficiency and low cost. A method based on the improved auto regressive moving average (ARMA) model is proposed for cutting force predictions in milling process. Design/methodology/approach First, classification and normalization are made for initial cutting force. Second, the cutting force sequences are compressed followed singular and valid value removed. At last, the improved ARMA model is used for cutting force fit and extrapolation considered the time domain characteristics. Findings A series of cutting force with the spindle speed 595r/min is carried out in the research. It is showed that the mean absolute percentage error value of cutting force extrapolation results which is based on the improved model is smaller. The percentage value is approximately 5.80%. Then the root mean square error test value is only 72.49, which is smaller than that with other traditional method, such as hidden Markov model. The extrapolation results with the proposed model performed good consistency and accuracy in terms of peaks, valleys and volatility compared with the experiment results. Originality/value The proposed method that is based on the improved ARMA model can be used for cutting force predictions conveniently. And the predictions can be used for improving the qualities in milling process.