Abstract
Purpose
In furthering numerical optimization techniques for the light-weighting of components, it is paramount to produce algorithms that closely mimic the physical behavior of the specific manufacturing method under which they are created. The continual development in topology optimization (TO) has reduced the difference in the optimized geometry from what can be physically realized. As the reinterpretation stage inevitably deviates from the optimal geometry, each progression in the optimization code that renders the final solution more realistic is beneficial. Despite the efficacy of material extrusion (MEx) in producing complex geometries, select manufacturing constraints are still required. Thus, the purpose of this paper is to develop a TO code which demonstrates the incorporation of MEx specific manufacturing constraints into a numerical optimization algorithm.
Design/methodology/approach
A support index is derived for each element of the finite element mesh that is used to penalize elements, which are insufficiently supported, discouraging their existence. The support index captures the self-supporting angle and maximum allowable bridging distance for a given MEx component. The incorporation of the support index into a TO code is used to demonstrate the efficacy of the method on multiple academic examples.
Findings
The case studies presented demonstrate the methodology is successful in generating a resulting topology that is self-supporting given the manufacturing parameters specified in the code. Comparative to a general TO problem formulation, the optimal material distribution results in a minimally penalized design on a compliance normalization metric while fully adhering to the MEx specific parameters. The methodology, thus, proves useful in generating an infill geometry is fully enclosed regions, where support material extraction is not a possibility.
Originality/value
The work presented is the first paper to produce a novel methodology that incorporates the manufacturing-specific constraint of bridging distance for MEx into TO code. The results generated allow for the creation of printed components with hollow inclusions that do not require any additional support material beyond the intended structure. Given the advancement, the numerical optimization technique has progressed to a more realistic representation of the physical manufacturing method.
Subject
Industrial and Manufacturing Engineering,Mechanical Engineering
Reference31 articles.
1. Effects of build orientations on tensile properties of PLA material processed by FDM;Advanced Materials Research,2014
2. Critical parameters influencing the quality of prototypes in fused deposition modelling;Journal of Materials Processing Technology,2001
3. Multi-objective optimization approach in design for additive manufacturing for fused deposition modeling;Rapid Prototyping Journal,2018
4. Monitoring the effects of selective laser sintering (SLS) build parameters on polyamide using near infrared spectroscopy;Journal of Applied Polymer Science,2011
5. Generating optimal topologies in structural design using a homogenization method;Computer Methods in Applied Mechanics and Engineering,1988
Cited by
1 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献