Equidistant path generation for improving scanning efficiency in layered manufacturing-Reference-Cited by-同舟云学术

Equidistant path generation for improving scanning efficiency in layered manufacturing

Published:2002-03-01 Issue:1 Volume:8 Page:30-37
ISSN:1355-2546
Container-title:Rapid Prototyping Journal
language:en
Short-container-title:

Author:

Yang Y.,Loh H.T.,Fuh J.Y.H.,Wang Y.G.

Abstract

Path generation is an important factor that affects the quality and efficiency of most laminated manufacturing processes such as SLS, SLA and FDM. This paper introduces an efficient path generation algorithm. The principle of the algorithm and its implementation are presented. A comparative study is used to analyze the effectiveness of this method. The results of comparison on both path length and processing time between the traditional method and the proposed method are discussed.

Publisher

Emerald

Subject

Industrial and Manufacturing Engineering,Mechanical Engineering

Reference11 articles.

1. Bertoldi, M., Yardimci, M.A., Pistor, C.M. (1998), Domain decomposition and surface filling curves in toolpath planning and generation, Solid Freeform Fabrication Symposium Proceedings. Austin, TX, pp. 267‐74.

2. Farouki, R.T. and Sakkalis, T. (1990), “Pythagorean hodographs”, IBM Journals of Research and Development, Vol. 34 No. 5, pp. 736‐52.

3. Kim, D. (1998), “Polygon offsetting using a Voronoi diagram and two stacks”, Computer‐Aided Design, Vol. 30 No. 14, pp. 1069‐75.

4. Kulkarni, P. and Dutta, D. (1999), “Deposition strategies and resulting part stiffness in fused deposition modeling”, Journal of Manufacturing Science and Engineering, Vol. 121 No. 1, pp. 93‐103.

5. Ganesan M., Fadel G. (1994), Hollowing rapid prototyping parts using offsetting techniques, Proceedings of the Fifth International Conference on Rapid Prototyping, University of Dayton, June, pp. 241‐51.

Cited by 104 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Key technologies and research progress in robotic arc additive remanufacturing;Sensors and Actuators A: Physical;2024-10

2. Sawtooth scanning strategy for additive manufacturing;Rapid Prototyping Journal;2024-08-08

3. Predicting and optimizing the dimensions of rod in lattice structures fabricated by laser powder bed fusion;Materials Today Communications;2024-08

4. Research on Additive Manufacturing Path Planning of a Six-Degree-of-Freedom Manipulator;Actuators;2024-06-30

5. A comprehensive review of process planning and trajectory optimization in arc-based directed energy deposition;Journal of Manufacturing Processes;2024-06