Effects of peak laser power on laser micro sintering of nickel powder by pulsed Nd:YAG laser
Author:
Ke Linda,Zhu Haihong,Yin Jie,Wang Xinbing
Abstract
Purpose
– The purpose of this paper is to report the influence of the peak laser power on laser micro sintering 4-μm nickel powder using Q-switched 1064-nm Nd:YAG laser.
Design/methodology/approach
– Experimental study has been performed. Nickel powder with grain size of 4 μm has been utilized. A Q-switching duration of 20-25 μs and rate of 20-40 kHz have been used.
Findings
– The peak power intensity is so high that the metal particles and molten pool are blown away, leading to laser micro sintering not being successfully proceeded. The scanning line obtained by continuous-wave (CW) laser looks like a rod owing to balling effect. Using a suitable peak power intensity, a good-shaped sintering line can be obtained because the plasma can protect the molten metal from oxidation, and improve the wettability of the system. In addition, the plasma flattening effect may also contribute to the form of the good-shaped sintering line in pulsed laser sintering regime.
Originality/value
– The role of plasma induced by pulsed laser with high peak power intensity has been found during pulsed laser sintering under an ambient environment.
Subject
Industrial and Manufacturing Engineering,Mechanical Engineering
Reference15 articles.
1. Cai, H.
,
Cheng, Z.H.
,
Zhu, H.H.
and
Zuo, D.L.
(2005), “Fracture mechanisms of Hg0.8Cd0.2Te induced by pulsed TEA-CO2 laser”, Applied Surface Science, Vol. 252 No. 5, pp. 1685-1692. 2. Chen, J.M.
,
Yue, C.F.
,
Zhang, Y.
,
Wang, X.B.
and
Zuo, T.C.
(2004), “The microfabrication using powder materials with excimer laser”, Proceedings of the SPIE-The International Society for Optical Engineering, Vol. 5641, pp. 205-210. 3. Dai, C.
,
Zhu, H.H.
and
Ke, L.D.
(2013), “Investigation of plasma spectra during selective lasermicro sintering cu-based metal powder”, Rapid prototyping Journal, Vol. 19 No. 5, pp. 373-382. 4. Ebert, R.
,
Ullmann, F.
,
Hartwig, L.
,
Suess, T.
,
Kloetzer, S.
,
Streek, A.
,
Schille, J.
,
Regenfuss, P.
and
Exner, H.
(2010), “Laser microsintering of tungsten in vacuum”, Proceedings of the SPIE-The International Society for Optical Engineering, Vol. 7589, pp. -12). 5. Exner, H.
,
Regenfuss, P.
,
Hartwig, L.
,
Klotzer, S.K.
and
Ebert, R.
(2003), “Selective laser micro sintering with a novel process”, Proceedings of the SPIE-The International Society for Optical Engineering, Vol. 5063, pp. 145-151.
Cited by
8 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献
|
|