Author:
Shelton Travis Edward,Stelzer Dylan Joseph,Hartsfield Carl R.,Cobb Gregory Richard,O'Hara Ryan P.,Tommila Christopher D.
Abstract
Purpose
For many applications, including space applications, the usability and performance of a component is dependent on the surface topology of the additively manufactured part. The purpose of this paper is to present an investigation into minimizing the residual surface roughness of direct metal laser sintering (DMLS) samples by manipulating the input process parameters.
Design/methodology/approach
First, the ability to manipulate surface roughness by modifying processing parameters was explored. Next, the surface topography was characterized to quantify roughness. Finally, microthruster nozzles were created both additively and conventionally for flow testing and comparison.
Findings
Surface roughness of DMLS samples was found to be highly dependent on the laser power and scan speed. Because of unintended partially sintered particles adhering to the surface, a localized laser fluence mechanism was explored. Experimental results show that surface roughness is influenced by the varied parameters but is not a completely fluence driven process; therefore, a relationship between laser fluence and surface roughness can be incorporated but not completely assumed.
Originality/value
This paper serves as an aid in understanding the importance of surface roughness and the mechanisms associated with DMLS. Rather than exploring a more common global energy density, a localized laser fluence was initiated. Moreover, the methodology and conclusions can be used when optimizing parts via metal additive manufacturing.
Subject
Industrial and Manufacturing Engineering,Mechanical Engineering
Cited by
8 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献