Abstract
PurposeThis research aims to examine the impact of friction stir processing (FSP) treatment on an aluminum alloy, especially the AD31T alloy derived from the Al-Fe-Mg-Si system. The aim is to assess the influence of different processing techniques on the microstructure and physical and mechanical characteristics of the material, with a specific focus on structural and bulk imperfections inside the stir zone (SZ).Design/methodology/approachThe study demonstrates that augmenting the linear velocity of the tool within the 25–100 mm/min range results in significant enhancements. The enhancements include a decrease in the heat-affected zone (HAZ), a reduction in the extent of volume defects inside the SZ and a more uniform deformation. The microstructural analysis results are corroborated by data acquired from microhardness and electrical conductivity studies, confirming the beneficial influence of modifying the tool’s linear velocity on the material parameters.FindingsThis study provides significant observations on the changes in microstructure and the generation of flaws throughout the process of FSP of AD31T alloy. These results have practical implications for improving the characteristics of the alloy and optimizing the production conditions.Originality/valueAll samples exhibit a distinct reduction in electrical conductivity within the initial third of the sample, aligning with the transitional region between the base metal (BM) and the HAZ. This underscores the importance of understanding the transitional zones during FSP.