Thermal modeling and analysis of double-sided water-cooled permanent magnet linear synchronous machines
Author:
Chen Yi,Yao Yihua,Lu Qinfen,Huang Xiaoyan,Ye Yunyue
Abstract
Purpose
– With the popularization of permanent magnet linear synchronous machines (PMLSMs) in recent years, the temperature rise has attracted increasingly attention since excessive heat generated in the windings could deteriorate the electromagnetic performance. In order to solve this problem, adopting water-cooled system is an effective method. The purpose of this paper is to investigate a 12-slot/11-pole (12S/11P) water-cooled double-sided PMLSM, which adopts the all teeth wound concentrated winding and shifted armature ends.
Design/methodology/approach
– Based on 2D finite element analysis (FEA), the thermal performances, such as temperature distribution, the optimization of water flow rate and the influence of demagnetization, are investigated under the condition of continuous duty. Then the maximum current density and average thrust force are calculated for PMLSMs with or without water-cooled system. Finally, the detailed comparison is made between single-sided PMLSM and double-sided PMLSM.
Findings
– With water-cooled system, the thermal performance of PMLSM can be improved, such as an efficient decrease of temperature rise, restriction of permanent magnet demagnetization and a dramatic increase of the maximum thrust force. It is found that the water flow rate has a significant impact on temperature rise, which can be optimized according to demands.
Originality/value
– Electromagnetic and thermal coupled analysis is proposed in this paper. It can approximately predict thermal performance and save the manual iteration time at the same time. This method also can provide as a reference of thermal analysis for other PMLSMs.
Subject
Applied Mathematics,Electrical and Electronic Engineering,Computational Theory and Mathematics,Computer Science Applications
Reference10 articles.
1. Arbab, N.
,
Wang, W.
,
Lin, C.
,
Hearron, J.
and
Fahimi, B.
(2015), “Thermal modeling and analysis of a double-Stator swiched reluctance motor”,
IEEE Transactions on Energy Conversion
, Vol. 30 No. 3, pp. 1209-1217. 2. Chayopitak, N.
and
Taylor, D.G.
(2005), “Thermal analysis of linear variable reluctance motor for manufacturing automation applications”, 2005 IEEE International Conference on Electric Machines and Drives, San Antonio, TX, May 15, pp. 866-873. 3. Kou, B.Q.
,
Huang, X.Z.
,
Wu, H.X.
and
Li, L.Y.
(2009), “Thrust and thermal characteristics of electromagnetic launcher based on permanent magnet linear synchronous motors”,
IEEE Transactions on Magnetics
, Vol. 45 No. 1, pp. 358-362. 4. Kreith, F.
and
Bohn, M.S.
(1993),
Principles of Heat Transfer
, 5th ed., West Publishing Company, St Paul, MN. 5. Li, L.Y.
,
Huang, X.Z.
,
Zhang, L.L.
and
Tang, Y.B.
(2008), “Thermal characteristic of double-side tabular permanent magnet linear synchronous motor in different working models”, IEEE Vehicle Power and Propulsion Conference, Harbin.
Cited by
7 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献
|
|