Thermo-hydraulic and entropy generation investigation of nano-encapsulated phase change material (NEPCM) slurry in hybrid wavy microchannel

Abstract

Purpose This study aims to capture the heat transfer and entropy generation characteristics of temperature-dependent nano-encapsulated phase change material (NEPCM) slurry in a hybrid wavy microchannel. In addition, the effect of substrate material combined with NEPCM slurry on conjugate heat transfer condition is captured for different microchannel heat sinks. Design/methodology/approach A novel “hybrid wavy microchannel” is proposed to enhance the overall heat transfer and reduce the pressure drop by combining wavy and raccoon geometry. NEPCM–water slurry is implied in the hybrid wavy, conventional wavy and raccoon microchannel. A user-defined function (UDF) is used to observe the effect of phase-change of paraffin material in thermophysical properties of NEPCM–water nanofluid. All three (hybrid, wavy, raccoon) microchannels are engraved on a rectangular substrate of 1.8 mm width (ωs) and 30 mm length (L), respectively. For hybrid, wavy and raccoon microchannel, waviness (γ) of 0.067 is selected for the investigation. Findings The result shows that NEPCM particle presence reduces the fluid domain temperature. The thermal performance of proposed Heat sink 2 is found better than the Heat sink 1. The effect of the geometrical modification, wall thermal conductivity, different volumetric concentrations of nanoparticles (ϕ ∼ 1 – 5%) and Reynolds number (Re ∼ 100 – 500) on thermodynamic irreversibility is also observed. Additionally, the effect of thermal and frictional entropy generation is reduced with a combination of NEPCM slurry and higher conductive material for all heat sinks. Practical implications A combination of NEPCM slurry with laminar flow microchannel cooling system emerged as a better alternative over other cooling techniques for higher power density devices such as microprocessors, electronic radar systems, aerospace applications, semiconductors, power electronics in modern electronic vehicles, high power lasers, etc. Originality/value The phase-change process of the NEPCM slurry is tracked under conjugate heat transfer in a hybrid wavy microchannel. Furthermore, the phase-change process of NEPCM slurry is captured with different heat sink materials (SS316, silicon and copper) under conjugate heat transfer situation for different heat sinks and concentrations (ϕ ∼ 1–5) of NEPCM.