Author:
Andrae Anders S.G.,Itsubo Norihiro,Inaba Atsushi
Abstract
PurposeUsing two different conceptual approaches to environmental life‐cycle assessment, attributional and consequential, the purpose was to test the hypothesis that a typical lead free solder paste Sn95.5Ag3.8Cu0.7 is worse than Sn63Pb37 as far as global environmental impacts are concerned.Design/methodology/approachSingle index weighting indices within the impact methodology Life cycle Impact Assessment Method based on Endpoint Modelling (LIME) impact methodology, were applied to the flows of three life cycle inventory models and their globally related flows. The LIME results based on three environmental impact categories, i.e. resource consumption, global warming and ozonelayer depletion are presented and discussed.FindingsThe attributional LCA (ALCA) results point towards a larger impact for Sn95.5Ag3.8Cu0.7 than Sn63Pb37 mostly due to the higher Sn and Ag content. This study confirms earlier similar ALCAs. The system expansion for the Consequential LCA (CLCA) did not change this conclusion.Research limitations/implicationsThe present study has not included the affected microelectronics packaging parts of electronic products, nor has it included toxic effects as they are local. ALCA was considered to be equal to CLCA for Sn95.5Ag3.8Cu0.7, where no Ag nor Sn recycling was included.Originality/valueFor the first time a global environmental impact assessment of the shift to Pb‐free solder paste using the LIME weighting method applied to a CLCA is reported. Environmental life‐cycle investigations intended to support decisions of an ecological nature in the microelectronics packaging industry should benefit from the consequential approach.
Subject
Electrical and Electronic Engineering,Condensed Matter Physics,General Materials Science,Electrical and Electronic Engineering,Condensed Matter Physics,General Materials Science
Reference43 articles.
1. Abou‐Zahr, C. (1999), “Disability adjusted life years (DALYS) and reproductive health: a critical analysis”, Reproductive Health Matters, Vol. 7 No. 14, pp. 118‐29.
2. Afgan, N.H., Pilavachi, P.A. and Carvalho, M.G. (2007), “Multi‐criteria evaluation of natural gas resources”, Energy Policy, Vol. 35 No. 1, pp. 704‐13.
3. Althaus, H.J. and Classen, M. (2005), “Life cycle inventories of metals and methodological aspects of inventorying material resources in ecoinvent”, International Journal of Life Cycle Assessment, Vol. 10 No. 1, pp. 43‐9.
4. Andræ, A.S.G. and Liu, J. (2006), “Consequential toxicity assessment of the global shift to Pb‐free solder paste”, Proceedings of the International Conference on Electronics Packaging, 19‐21 April, Tokyo, Japan, pp. 298‐303.
5. Andræ, A.S.G., Andersson, D.R. and Liu, J. (2005), “Significance of intermediate production processes in life cycle assessment of electronic products assessed using a generic compact model”, Journal of Cleaner Production, Vol. 13 Nos 13/14, pp. 1269‐79.
Cited by
8 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献