Low-cycle fatigue behavior and corrosion mechanism of pre-corroded 2A70-T6 aluminum alloy

Abstract

Purpose In summary, it can be found that the current research on the simulation of natural atmospheric dry–wet alternating accelerated corrosion mainly focused on the study of electrochemical corrosion process and the study of corrosion rate; the micro-pre-corrosion mechanism of materials in this environment, especially for materials. The specific effects of fatigue and fracture performance still lack detailed research. Accordingly, this study aims to more realistically simulate the effect of natural atmospheric corrosion environment on the corrosion resistance and fatigue performance of aircraft skin. Design/methodology/approach In this study, the uniaxial strain control method was used to test the fatigue performance of pre-corrosion samples under simulated natural atmospheric corrosion using MTS809 tensile-torque composite fatigue machine. Scanning electron microscopy, X-ray energy spectrum analysis, atomic force microscopy and X-ray diffraction analysis were used. Fatigue fracture, corrosion morphology and corrosion products were analyzed. Findings The results show that the deep corrosion pit caused by pre-corrosion environment leads to multi-source initiation of crack; the fatigue life of pre-corroded sample decreases by about one-half, chloride ion invades the material and promotes intergranular corrosion; life prediction results show that the natural atmospheric corrosive environment mainly affects the plastic term in the Manson–Coffin formula resulting in a decrease in fatigue life. Originality/value Innovative experimental schemes and materials are used and the test temperature and relative humidity are strictly controlled. The corrosion failure mechanism of 2A70-T6 aluminum alloy under alternating wet and dry accelerated corrosion environment and its influence on fatigue behavior were obtained.